BROSCO Book of Designs 2023

Exterior Wood Doors

Exterior Wood Doors are beautiful...

when installed properly and finished correctly!

For best performance and to meet the manufacturer's warranty, exterior doors should be installed under an overhang. Adequate overhang depends on typical weather conditions of the area where the door is installed, but at the minimum means an overhang projecting a distance from the structure equal to one half the distance between the bottom of the door and the bottom of the overhang. Exterior Wood Doors have to be protected with proper overhangs and finishing. Manufacturers require this in order to provide valid warranty coverage.

X

Y

Direction Door Faces Climate North South East X=Y X=Y X=Y X=Y Ocean X = 1/2 Y X = Y X = 1/2 Y X = Y West Mild Wet X = 1/2 Y X = Y X = 1/2 Y X = Y

Warranties may vary by manufacturer. Visit brosco.com for specific details.

Weather Out Flashing is dedicated to solving critical water intrusion Sroblems. This door ÁashinJ Sroducts are sSecially desiJned to be simSle to install, have built-in patented drain channels to direct the water out and easily Àt in any width oSeninJ. Door Pan Flashing Systems

6-9/16" Door Flashing –

2 Corners 6" 1 Straight 32" with 1/2" Back-dam

Designed with conventional 6-9/16" construction in mind.

Installation: Overlap using our waterproof tape with foil backing and Butyl-rubber adhesive.

4-9/16" Door Flashing –

2 Corners 6" 1 Straight 26" with 1/2" Back-dam

Installation: Use of a water-proof sealing tape at butt joints is required. Designed for use with windows and doors in a 4-9/16" wall. This system can also be used with double-hung windows in walls where the stool is elevated and will clear the back-dam.

273