BROSCO Book of Designs 2023

PVC Outdoor Products

BOSTON GUTTER SYSTEM

Better than wood and historically accurate gutter system.

The PVC Boston Gutter System offers the full aesthetic appeal of wood with strength and durability, but it weighs less and has more carrying capacity of a standard wood gutter. PVC is easy to install, with no special tools required. With no painting, no oiling, no worrying, the Boston Gutter System is a low-maintenance system.

• Extruded Cellular PVC • Full Aesthetic Appeal of Wood • Tested and Engineered by Independent Lab • Available in 10' and 20' Lengths • Radius available in 18' Lengths • 90° Splice Kits For Inside and Outside Corners and 180° Splice Kits • End Cap Kits • Downspout Outlet Kits • Bracket System to Hang & Float Gutter • All Seams Utilize 3M VHB Seals • Can be Painted (LRV Greater Than 55) • Actual gutter dimensions: 5-3/8" x 3-1/2" • Must be installed with INTEX Boston Gutter System Brackets to maintain warranty

Optional scotia moulding available as additional decorative detail

The Boston Gutter System was designed as a "System". All the components required to properly install the Boston Gutter System are available as accessory kits.

Gutter Sections 3-1/2" x 5-3/8" x 10'-0" Straight Gutter 3-1/2" x 5-3/8" x 20'-0" Straight Gutter 3-1/2" x 5-3/8" x 18'-0" Radius Gutter Hardware Straight Gutter Hanger Bracket Kit 10'-0" Radius Gutter Hanger Bracket Kit 18'-0"

G46-10 G46-20 G46-R18

180° SPLICE KIT Includes Specially Formulated Bonding Tape

HANGER BRACKETS Allows Gutter to Float

GBKTSET

GBKTSET-R GENDCAP GSPLICE GCORNER GEXPJOINT GC2OUTLET GSCOTIA GSCOTIA-R

End Cap Kit

180 Degree Splice Kit

Gasket, Screws, Primer for Corners – Inside & Outside

OUTSIDE CORNER SPLICE KIT

Expansion Joint Kit Downspout Outlet Kit

DOWNSPOUT OUTLET KIT

Scotia Moulding 18'-0" Straight Scotia Moulding 18'-0" Radius

Tools Drill Jig - Reusable

INSIDE CORNER SPLICE KIT

GJIG

Driver Bit Cortex for End & Corner Kits

CCTBIT

Following the guidelines above will ensure a successful gutter installation and a lifetime of low maintenance performance. As with any Jutter system it’s imSortant to clean debris from the gutter periodically to ensure proper drainage. Failure to keep debris from the gutter could result in damage due to water from ice and snow buildup.

GUTTER ASSEMBLY To allow for proper water

SassaJe into the Jutter the ÁashinJ driS edge must extend 2" beyond the fascia.

508